Buyer applications
Enkei Procurement by Buying Channel
Application checks
Choose the checks that match your order
Wheel importers
An importer comparing 17 × 8 in ET35 wheels for a 5×114.3 mm platform should ask both vendors for center bore, lug-seat profile, wheel load rating and the same brake-clearance drawing. Compare the actual options on the same target specification.
| Check | Forged quote | Cast quote |
|---|---|---|
| Mass and load | Record supplier mass in kg and the load rating at the offered size. | Request the same values for the actual casting and diameter. |
| Brake envelope | Compare the back-of-spoke profile to the caliper template. | Review the catalog drawing. Confirm the spoke section at the required ET. |
| Inspection | Ask for radial and lateral runout data from a sample with the quoted finish. | Request the same datums and gauge method on the cast sample. |
| Landed cost | Include drawing changes, finishing and sample charges if quoted. | Compare tooling or catalog charges and carton quantities at the same named handover point. |
Aftermarket distribution
A recurring catalog order can use a stocked finish when the supplier confirms the exact code and quantity. A custom finish needs an agreed color or gloss reference, tooling terms where applicable and a sample sign-off before packing. Use the same carton quantity and Incoterm when comparing the options.
Fleet and commercial wheel programs
On a steel wheel brief, give rim diameter, rim width, load rating, wheel fixing and axle position. Ask for bolt-seat geometry and a mounting-face datum. For radial and lateral runout, state the gauge position, assembly condition, unit and agreed acceptance limit on the inspection brief.
Tire and specialty programs
Provide tire size, load index, speed rating, duty cycle, tread pattern, quantity and destination port. On severe-service work, add cut exposure, sustained speed and heat conditions. Compare a low rolling resistance option with grip and service life using matching test conditions and intended axle loads.
Wheel-end and repair networks
Use the OE cross reference and vehicle or VIN to confirm hub flange dimensions, ABS encoder orientation and pole count, and supplied hardware. For a serviceable bearing check bore, OD, width, bearing preload method and seal lip orientation. An integrated hub can simplify field assembly where the application permits it.
Catalog and e-commerce teams
Group fitment records by platform, trim and axle, and give each wheel finish its own product reference. For mixed sourcing, normalize drawing revisions and carton labels across suppliers. A single source may reduce those coordination steps where its verified range covers all SKUs.